contacts copper alloy plating contact area : gold alloy inlay terminals : tin lead (2 min) moldings high temp. thermoplastic ul 94v-0 rated card detection switch stainless steel and copper alloy number of contacts 8 mechanical life 100,000 cycles min card insertion force 10 n max card extraction force 1 n min /10 n max (4n max for ccm01-2253, 2255) contact force 0.25 n min / 0.50 n max card detection switch 0.8 n max for actuation (end travel switch actuation force actuates when card is 0,9 mm from card stop); 1.8 n max for complete depression vibration frequency 10 to 500 hz. acceleration 50m/s 2 duration 6 hours - amplitude 0,35 mm; max electrical discontinuity 1? shock peak value 500 m/s 2 ?duration 11 ms 3 shocks in each direction of each axis; max electrical discontinuity 1 ? insulation resistance 1,000 m ? min resistance 100 m ? max current rating 10 ? min / 1 a max dielectric strength 750 vrms min card detection switch normally open contact resistance 100 m ? max dielectric strength 250 vrms min current rating 1 ma min / 10 ma max maximum power 0.2 va operating temperature -40? to +85? soldering temperature temperature/time pro?e acc. to cecc00802 para. 6.1, fig. 3 with peak temperature 250? damp heat iec 512 test number 11c (10 days) salt mist iec 512 test number 11f (96 hours) card detection switch sealed against dust 30 per tray, 10 trays per box. 8 www.ittcannon.com ccm01 mk ii the ccm01 mk ii connectors with ?ed contacts have been developed for applications where a landing contact mechanism is not required but performance and reliability are still key considerations. features ? available with 8 contacts which are designed to give a consistently reliable normal force over the life of the connector. ? for added reliability, the card detection switch (which is normally open) is sealed against dust and debris. ?available with through-hole or surface mount contact termination and its light- weight design means that the connector can be automatically pick-and-placed. ? the moldings are made from high temperature thermoplastics suited for infrared and convection soldering processes. ? plastic springs in the cover give a positive feel as the card is fully inserted. in case of special version with low card insertions and withdrawal, then the ccm connector is supplied without this spring effect. ? the reduced size of the contact base saves pcb space, making the connector more stable during soldering. this creates an air gap between the contacts and card entry slot which reduces the risk of an electrostatic transfer to the pcb. ?by using an inlay ?ish in the contact area, the life of the precious metal is extended by more than 10 times that of standard gold plating. ? a chamfered opening to the card entry slot improves the card guidance into the connector. ? the contact area is spooned to reduce the risk of accidental (or deliberate) damage and to optimize the electrical connection with the card. ? robustly formed printed circuit tails allow a coplanarity of 0.05 mm to be maintained. emv tm is a trademark owned by emvcollc. part number number termination retention packaging of contacts tail design force multiple ccm01-2064 8 tht w/board lock <10n 300 ccm01-2065 8 smt w/board lock <10n 300 ccm01-2251 8 smt <10n 300 ccm01-2253 8 smt <4n 300 CCM01-2255 8 through-hole <4n 300 construction mechanical data contact electrical data switch electrical data environmental data ordering code packaging emv tm compatible
ccm01 mk ii dimensional drawings a a (ref.) 50,2 1 0,3 a 4 3 3x 2,54 36,2 4,15 0,3 card entry 8 0,3 (ref.) 55,6 (ref.) 36,2 54,3 55,6 0,2 0,65 1 4,4 0,2 7,6 7,6 9,6 0,1 15,5 20 0,9 0,25 5,8 6,3 0,7 0,3 a 0,8 0,85 (ref.) 9,6 0,1 0 -0,1 (ref.) 7,6 52 ? 0,2 a b 19,12 1,8 3,15 1,6 pcb thickness 14 10 4 snap feet embossed channel card insertion direction ccm01- 2065 xx-xxx designation & date-code area card stop 8x pick and place area ? 13 2x 4x see detail a a-a detail a a pcb layout 20 1,8 0 14 10 3,81 3,81 2,64 15,2 9,6 19,12 0 21,66 24,2 26,74 29,74 33,74 52 12,9 1,5 1,5 9,2 2 1,3 0,2 ? 3,2 +0,1 0 ? 0,1 (component side) card end travel switch terminals 0,85 x 0,7 contact foot area 0,8 x 1 4x 10x c1 c2 c3 c4 c5 c6 c7 c8 sw sw contact location according to iso 7816-2 plastic outline pad ccm01-2065 (8 contacts smt with board lock) drawings shown for reference only. for other part numbers please consult your local cannon customer service center. unless otherwise stated, tolerances are 0,10 mm ccm01-2065 9 dimensions are shown in mm dimensions subject to change www.ittcannon.com
|
